Hiroshi Ishii
where else to find them
no profile links on file
what they talk about
all 6 in the filters
where they keep going back
on a stage with
all 48 in the filters
who talks about the same things
nobody close enough yet
| title | conference | date |
|---|---|---|
| BioLIG: Functionalizing Biocomposites with Laser-induced Graphene for Bio-Rapid Prototyping of El... | UIST 2025 | 2025-09-28 |
A CO2 laser turns five bio-based recipes into conductive laser-induced graphene on three sheets and two paints, with the best ink matching polyimide LIG and… | ||
| OmniFiber: Integrated Fluidic Fiber Actuators for Weaving Movement-based Interactions into the ... | UIST 2021 | 2021-10-10 |
OmniFiber presents a concrete toolkit: spray‑printed carbon black strain sensors on microtubules, fluidic McKibben‑style contractible fibers that shorten ~32%… | ||
| HERMITS: Dynamically Reconfiguring the Interactivity of Self-propelled TUIs with Mechanical ... | UIST 2020 | 2020-10-20 |
HERMITS presents a modular architecture that extends self‑propelled TUIs with passive mechanical shells that robots can automatically dock and undock. A… | ||
| milliMorph -- Fluid-Driven Thin Film Shape-Change Materials for Interaction Design | UIST 2019 | 2019-10-20 |
milliMorph fabricates arrays of millimeter-scale fluidic chambers on 20 μm PET film using a non-contact hot air sealing method that yields sub-millimeter seams… | ||
| SCALE: Enhancing Force-based Interaction by Processing Load Data from Load Sensitive Modules | UIST 2019 | 2019-10-20 |
A portable toolkit of small black boxes houses 3D load cell modules wired to a Teensy microcontroller and C++ library, letting arrays beneath surfaces estimate… | ||
| Printflatables: Printing Human-Scale, Functional and Dynamic Inflatable Objects | CHI 2017 | 2017-05-06 |
Printflatables converts a 3D model into 2D patterns, then a custom machine folds and heat-seals inextensible thermoplastic fabric using a pincher and XY gantry… | ||
| ChainFORM: A Linear Integrated Modular Hardware System for Shape Changing Interfaces | UIST 2016 | 2016-10-16 |
Prototype is a chain of identical modules: a commercial servo wrapped by a flexible PCB with an ATmega328, capacitive touch on six faces and 8 Neopixel LEDs… | ||
| aeroMorph - Heat-sealing Inflatable Shape-change Materials for Interaction Design | UIST 2016 | 2016-10-16 |
Pipeline for making single‑layer inflatables that bend predictably by patterned seams, claiming controllable angles and forces without composite layers. Uses… | ||
| Materiable: Rendering Dynamic Material Properties in Response to Direct Physical Touch with ... | CHI 2016 | 2016-05-07 |
A proof-of-concept system uses a pin-based shape display plus a physics emulator (virtual spring grid and shallow-water equations) to render deformable solids… | ||
| Haptic Edge Display for Mobile Tactile Interaction | CHI 2016 | 2016-05-07 |
A side-mounted linear array of tactile pixels uses Piezo actuators in two prototypes (initial 24-servo then a 40-pin 2-row design with 2.5mm pitch, 1.6mm pin… | ||
| uniMorph: Fabricating Thin Film Composites for Shape-Changing Interfaces | UIST 2015 | 2015-11-08 |
A thin-film actuator combines copper + UHMW‑PE composite so differential thermal expansion makes flat sheets bend or curl under heat; actuation comes from… | ||
| LineFORM: Actuated Curve Interfaces for Display, Interaction, and Constraint | UIST 2015 | 2015-11-08 |
Implements series chain of 1DOF servo motors (inspired by snake robotics) with Arduino + Processing control and onboard sensors, demonstrated as two scale… | ||
| Kinetic Blocks: Actuated Constructive Assembly for Interaction and Display | UIST 2015 | 2015-11-08 |
Shape-changing table uses 900 actuated pins moving 10 cm to assemble, disassemble and animate 5x5x5 cm wooden blocks weighing 90 g, plus magnetic locking… | ||
| nothing matches | ||